TREN
HDD RigsHDD RigsDrill RodsDrill RodsSonde HousingSonde HousingDirectional Drill BitsDirectional Drill BitsRock Drilling BitsRock Drilling BitsReamersReamersSwivelsSwivelsAccessoriesAccessoriesLocators / SondesLocators / Sondes
STETON S600A-L horizontal directional drilling rig
Heavy class · 60-tonne class

STETON S600A-L Horizontal Directional Drilling Rig

The S600A-L is the long-rod variant of the S600A. All its technical values are the same as the S600A; the difference is that it uses 4.5-metre rods instead of the standard 3 metres. Thanks to the longer rods, the number of rod additions is reduced and operations speed up on long lines. With high-efficiency hydraulic components, a 600 L/min (optional 800 L/min) mud pump and a rod magazine, it delivers superior performance on large-diameter pipe crossings.

Push / Pull60 tonnes
Rotary torque32,430 Nm
Mud flow600 L/min
Engine power194 kW
EngineFIAT / CUMMINS Euro 5
Call about this machine!+90 533 075 0222
STETON S600A-L long-rod HDD rig with the mast at drilling angle
Application

Which projects is the S600A-L for?

A heavy class for long crossings under rivers, motorways and railways, and for large-diameter steel and PE pipelines. High torque and 600 L/min mud flow keep the bore clean and the pullback safe on long lines.

Share your pipe diameter, crossing length and soil class; we will confirm over the phone whether the S600A-L is enough for the job, or whether the class above or below fits better. Rig selection guide →

Matching tooling

Equipment used with the S600A-L.

Drill RodsS145 heat-treated rod sets matched to the rig thread standard.Sonde HousingSonde housings that shield the transmitter from impact and wear.Directional Drill BitsPilot-bore directional bits for sand, silt and clay.Rock Drilling BitsHammer bits and mud motors for hard ground and rock.ReamersStaged back-reamers sized to the pipe diameter.SwivelsAnti-torsion swivels matched to the pullback class.AccessoriesAdapters, pulling heads and consumables.Locators / SondesLocating systems that read transmitter depth, pitch and position from the surface.
Other models

Compare within the STETON series.

STETON S200A horizontal directional drilling rigSTETON S200A20 t · 8,471 Nm · 400 L/minSTETON S350A horizontal directional drilling rigSTETON S350A35 t · 15,832 Nm · 400 L/minSTETON S600A horizontal directional drilling rigSTETON S600A60 t · 32,430 Nm · 600 L/minSTETON S800 horizontal directional drilling rigSTETON S80080 t · 40,000 Nm · 800 L/minSTETON S1350 horizontal directional drilling rigSTETON S1350135 t · 55,000 Nm · 1000 L/minSTETON ST2200 horizontal directional drilling rigSTETON ST2200220 t · 85,000 Nm · 1000 L/minSTETON ST3800 horizontal directional drilling rigSTETON ST3800380 t · 138,000 Nm · L/min

All rigs and comparison table →

Frequently asked

About the STETON S600A-L.

How much pullback does the STETON S600A-L have?

Push/pull force is 60 tonnes. As pipe diameter and crossing length grow, the rig is chosen with a margin above this figure.

Which projects suit the STETON S600A-L?

A heavy class for long crossings under rivers, motorways and railways, and for large-diameter steel and PE pipelines. High torque and 600 L/min mud flow keep the bore clean and the pullback safe on long lines.

Which rods and bits work with the S600A-L?

Rods matched to the rig thread standard, a directional bit or rock bit chosen for the soil class, a sonde housing, reamers and a swivel. All of it ships from Boremak stock; share your soil survey and we will specify the tool set together.

How much does the STETON S600A-L cost?

The price depends on the rod package, initial tooling set, locating system and delivery terms. Call us for a firm quotation on the S600A-L.

Stock, lead time and the right tool set for the STETON S600A-L: one call away.

+90 533 075 0222
Call nowWhatsApp