STETON S1350 Horizontal Directional Drilling Rig
The S1350 is a maxi-class rig that pulls pipe up to Ø1500 mm with 1350 kN of thrust and pullback. Its 55,000 Nm of torque and 1000 L/min of mud flow deliver the two figures needed together to keep the bore clean while running a large reamer. The 6,000 mm rods cut the number of rod connections on a 1000-metre line appreciably, shortening the crossing and reducing the risk of connection-related failure. With Ø114 and Ø127 mm rod options, the same rig adapts to different ground and diameter scenarios.
| Push / Pull | 135 tonnes |
|---|---|
| Max thrust / pullback force | 1350 / 2000 kN |
| Rotary torque | 55,000 Nm |
| Max rotary speed | 100 rpm |
| Mud flow | 1000 L/min |
| Max mud pressure | 10 ± 0.5 MPa |
| Engine power | 264 kW |
| Drill rod diameter | Ø114 / Ø127 mm |
| Drill rod length | 6,000 mm |
| Pullback pipe diameter | Ø1500 mm |
| Max crossing length | 1,000 m |
| Power head travel speed | 38 m/min |
| Entry angle | 11–22° |
| Climbing angle | 15° |
| Dimensions (L × W × H) | 11900 × 2960 × 3350 mm |
| Weight | 28 tonnes |
Figures are taken from the manufacturer's technical data sheet. Final configuration and tolerances are confirmed at quotation stage.
Call about this machine!+90 533 075 0222S1350 at work.
Which projects is the S1350 for?
A maxi class for river and strait crossings, marine outfalls and large-diameter transmission mains. It works on single crossings approaching a kilometre and on pipe diameters beyond what the mid classes can carry. Site footprint, transport and crew planning are set per project; the rig is supplied to order.
Share your pipe diameter, crossing length and soil class; we will confirm over the phone whether the S1350 is enough for the job, or whether the class above or below fits better. Rig selection guide →
Equipment used with the S1350.
Compare within the STETON series.
About the STETON S1350.
How much pullback does the STETON S1350 have?
Push/pull force is 135 tonnes. As pipe diameter and crossing length grow, the rig is chosen with a margin above this figure.
Which projects suit the STETON S1350?
A maxi class for river and strait crossings, marine outfalls and large-diameter transmission mains. It works on single crossings approaching a kilometre and on pipe diameters beyond what the mid classes can carry. Site footprint, transport and crew planning are set per project; the rig is supplied to order.
Which rods and bits work with the S1350?
Rods matched to the rig thread standard, a directional bit or rock bit chosen for the soil class, a sonde housing, reamers and a swivel. All of it ships from Boremak stock; share your soil survey and we will specify the tool set together.
How much does the STETON S1350 cost?
The price depends on the rod package, initial tooling set, locating system and delivery terms. Call us for a firm quotation on the S1350.
Stock, lead time and the right tool set for the STETON S1350: one call away.
+90 533 075 0222